Everything you need to get the most out of your Radbot
Simple to install
Fitting Radbot couldn’t be simpler. It can usually be installed in under 2 minutes.
No need for tools or a plumber. Just follow these steps:
1. Select the radiator you are going to install Radbot on
2. Remove the old thermostatic valve head
3. Select and fit the correct adaptor
4. Insert the batteries
5. Fit and tighten
6. Job done!
Easy to use
Apart from the clever bit going on inside, Radbot works like just like a regular radiator thermostat. Set the comfort level you want and Radbot warms the room.
It does have a handy boost button. If you ever need a bit more heat just press the top and it will give you a blast for 30 mins before returning to its original temperature. No need for you to remember to turn it back down again!
What’s in the box
A smart thermostatic radiator control device.
Compatible with wet central heating systems with radiators that have existing thermostatic radiator valves fitted. Supplied with 6 valve adaptors.
1 Radbot device
6 Valve adaptors
2 x 1.5V AA batteries
Quick reference guide
2 x 1.5V AA batteries (supplied), battery life approx. 2 years
Temperature / humidity / ambient light
90 x 55 x 55 mm